Die Radservicestation steht zwischen der Thulbatalhalle und der Thulbabrücke in Thulba direkt am Thulbatalradweg. Sie dient dazu kleine Reparaturen während einer Radtour selbst durchzuführen. Die Radservicestation ist ausgestattet mit einem Kreuzschlitzschraubendreher PH2, einem Schraubenzieher 5,5 mm, einem TORX-Schlüsselsatz T9-T40, einem verstellbarem Einmaulschlüssel 0 - 32 mm, zwei Doppelmaulschlüsseln (8 x 10 mm und 13 x 15 mm), einem Inbusschlüsselset 2-8 m, einem Reifenheber sowie einer Pumpe mit Adapter für alle Ventile bis max. 10 Bar.
La station d'entretien vélo est située entre la Thulbatalhalle et le pont de Thulba, à Thulba, directement sur la piste cyclable de la vallée de Thulba. Elle permet d'effectuer soi-même de petites réparations pendant une sortie à vélo. La station d'entretien pour vélos est équipée d'un tournevis cruciforme PH2, d'un tournevis de 5,5 mm, d'un jeu de clés TORX T9-T40, d'une clé à fourche réglable de 0 à 32 mm, deux clés à fourche (8 x 10 mm et 13 x 15 mm), d’un jeu de clés Allen de 2 à 8 mm, d’un démonte-pneu ainsi que d’une pompe avec adaptateur pour toutes les valves jusqu’à 10 bars maximum.
Stacja serwisowa dla rowerzystów znajduje się między halą Thulbatalhalle a mostem Thulbabrücke w Thulba, bezpośrednio przy trasie rowerowej Thulbatalradweg. Służy ona do samodzielnego wykonywania drobnych napraw podczas wycieczki rowerowej. Stacja serwisowa jest wyposażona w śrubokręt krzyżakowy PH2, śrubokręt 5,5 mm, zestaw kluczy TORX T9–T40, klucz nastawny 0–32 mm, dwoma kluczykami dwuskrzydłowymi (8 x 10 mm i 13 x 15 mm), zestawem kluczy imbusowych 2–8 mm, łyżką do opon oraz pompką z adapterem do wszystkich zaworów do maks. 10 barów.
The bike service station is located between the Thulbatalhalle and the Thulba Bridge in Thulba, right on the Thulbatal Bike Trail. It is designed to allow you to perform minor repairs yourself while out on a bike ride. The bike service station is equipped with a PH2 Phillips screwdriver, a 5.5 mm flathead screwdriver, a T9–T40 TORX key set, an adjustable open-end wrench (0–32 mm), two open-end wrenches (8 x 10 mm and 13 x 15 mm), a set of Allen wrenches (2–8 mm), a tire lever, and a pump with an adapter for all valve types up to a maximum of 10 bar.